|
|
Overview • Product Specifications • Vehicle Applications • Media/Press
Friendly User Interface: Easier to program, review and update the stored parameters. If you can set an alarm clock, you can program a SpeedoHealer® in a few minutes. Extended calibration range: -99.9% to +9999.9% in steps of 0.1% Which means the signal can be adjusted from 1/1000 to x100, in increments of 0.001 This range is efficient even for the most radical custom applications. Dual-Bank Memory: Allows storing two independent calibration values and switching among them is possible by the press of a button. There is a clear, visual confirmation of the active bank and value in use. Perfect for areas where you have summer and winter tires of different sizes. Km/h conversion: Change from Km/h to MPH by the press of a button. High-speed CPU: 32-bit processing ensures high accuracy and immediate response to the input signal (no lag). Ultra low power consumption and auto stand-by. Robust design: Every unit is fully tested, guaranteed to work. All leads are protected against reverse voltage, short circuits and high energy transients. Wide operating range: +3V to +19V at -40C to +80C (-40F to +176F) Rugged and weather resistant: Epoxy sealed unit is highly water resistant to water ingress (although we recommend REMOVING CONTROL UNIT during steam cleaning of engine bay). Plug-and-Play kits: Plug and play harness uses sealed OEM connectors which are IP-68 rated (1 meter water immersion for 1 hour without failure). So if you’re fording creeks, rest assured that we’ve given the connectors water protection as good as Jeep did for their undercarriage components. INSTALLS IN ABOUT 5 MINUTES, (even for novices)! Universal splicing kits: Universal kits require splicing at the speed sensor/transfer case with supplied sealed wire splices and wire taps, and work on ANY vehicle with a 3-wire speed sensor (Signal, Power, Ground). INSTALLS IN ABOUT 45 MINUTES Controller box only splicing kits: Meant for direct behind-the-dash installation (4.5" three wire cable) where a speed signal wire can be located between ECU/ECM and gauge cluster. Must provide unit with power and ground. INSTALL TIME VARIES Outstanding Warranty Support: Each unit comes with a 30 day money back guarantee, a 2-year unlimited warranty, and a lifetime limited warranty. Automotive-specific design: The automotive version SpeedoHealer® has a new control box design for easier firewall mounting and plug weatherproofing, and has a standard 190cm (75") cable. Longer cable lengths may be special ordered.
|
|
 |
 |
